Find a Dealer | Become a Dealer | Dealer Log In and Ordering

Home
SDC & ADV Pumps
Stream Pumps
Aquarium Pumps
Easy Line Pumps
PSK Skimmer Pumps
Nano Pumps
Jolly Nano Heater
Wave Surfer
Reactors
Hydroponics
Aquarium Filters
CO2 Life System
LED Lighting
Filter Media
Pond Pumps
Dirty Water Pumps
Pond Filters
Pond Lighting
HyperReef System
Fish Health
Water Conditioners
Product Videos
Support
Warranty Program
Why Sicce?
Find out why SICCE leads the industry in energy savings!



 



Download Syncra Pond Pump Cut Sheet
Download Spare Parts Diagram
Choosing A Pump



Pump Comparison Chart

Syncra Pond Pumps
Syncra Pond Pumps
are grounded high performance pumps which ensure high energy savings, quiet operation, ergonomic design, resistance to harsh conditions, and reliability. Innovative technology makes these pumps ideal for ponds, indoor and outdoor fountains, and all submersible and inline applications which require high performance and total silence.

Thanks to Sicce's 35 years of experience, Syncra Silent are equipped with a synchronous motor and an advanced rotor which makes them efficient and silent. Synchronous motors have the following advantages over non-synchronous motors:
• Speed is independent of the load, providing an adequate field current is applied.
• Accurate control in speed and position using open loop controls is possible.

Their power factor can be adjusted to unity by using a proper field current relative to the load. A "capacitive" power factor, (current phase leads voltage phase), can be obtained by increasing this current slightly, which can help achieve a better power factor correction.
Fountain Heads
Models 0.5-1.0 Model 1.5 Models 2.0-3.0 Models 3.5 - 5.0
1-way diverter valve
Waterbell
Waterlily
Single daisy
Double daisy
1-way diverter valve Waterbell
Daisy 3 st.
Waterlily
1-way diverter valve
Waterbell
Daisy 3 st.
Waterlily
Petunia
2-way diverter valve
Waterbell
Waterlily
Petunia
Iris
Foam Jet
Daisy 2 st.
Daisy 3 st.

Features:

• synchronous motor and advanced rotor
• grounded Pond Pump
• 4 feet shut off
• CE & UL listed
• increased electrical efficiency
• higher head pressure per watt
• higher flow per watt
• much smoother rotation
• less heat transfer
• fewer vibrations
• 20' cord
• 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer


8 models from185gph to 1321gph
Syncra 0.5 DW Pump: 185gph, 1/2" female inlet, & outlet, 4' max head, 1.73psi
Syncra 1.0 DW Pump: 251gph, 1/2" female inlet, & outlet, 5' max head, 2.17psi
Syncra 1.5 DW Pump: 35gph, 1/2" female inlet, & outlet, 6' max head, 2.60psi
Syncra 2.0 DW Pump: 568gph, 3/4" female inlet, 3/4" female outlet, 7.9' max head, 2.82psi
Syncra 3.0 DW Pump: 714gph, 3/4" female inlet, 3/4" female outlet, 9.9' max head, 4.30psi
Syncra 3.5 DW Pump: 660gph, 1" female inlet, 3/4" female outlet, 12.5' max head, 5.43psi
Syncra 4.0 DW Pump: 952gph, 1" female inlet, 3/4" female outlet, 12.6' max head, 5.43psi
Syncra 5.0 DW Pump: 1321gph, 1" female inlet, 3/4" female outlet, 12.6' max head, 5.47psi



Spare Parts:
Rotor - #SRG0050
Suction Cup - #SVE0021
Rotor - Shaft- Rubbers Syncra 0.5 120 V - SGR0050
Rotor - Shaft- Rubbers Syncra 1.0 120 V - SGR0052
Hose connector + O. Ring Syncrapond 0.5-1.0 - STR0012
Sponge Syncrapond 0.5-1.0 - SSP0016
O-ring Syncrapond 0.5-1.0 - SVE0029
Rotor - Shaft- Rubbers Syncra 1.5 120 V - SGR0054
Sponge Syncrapond 1.5 - SSP0017
O-ring Syncrapond 1.5 - SVE0030
Hose connector + O. Ring Syncrapond 1.5 - STR0013
Rotor-Shaft- Rubbers Syncrapond 2.0 120 V - SGR0058
Rotor-Shaft- Rubbers Syncrapond 3.0 120 V - SGR0059
Sponge Syncrapond 2.0-3.0 - SSP0018
O-ring Syncrapond 2.0-3.0 - SVE0031
O-ring Syncrapond 3.5-4.0-5.0 - SVE0032
Rotor - Shaft- Rubbers Syncrapond 3.5-4.0-5.0 120/60Hz - SGR0086
Hose connector + O. Ring Syncrapond 2.0- 5.0 - STR0011
Sponge 10PPI - 90440



See Utility Pumps and Syncra DW Pumps below for more applications.




Pump Comparison Chart
Syncra DW Pumps
This new range of grounded Syncra DW Pumps ensures high energy savings, quiet operation, ergonomic design, powerful performance, resistance to harsh conditions, and reliability. Filtration is guaranteed up to 2mm debris size while maintaining maximum performance. Their innovative construction, synchronous motors, ceramic shafts and unique rotors allow for increased electrical efficiency when low speeds are required.

With their innovative technology, Syncra DW Pumps are versatile with a range of uses. They are ideal for waterfalls, ponds, pond surface skimmers, water gardening, and drainage applications.

Features:
• Higher Head Pressure per watt
• Higher Flow Per Watt
• Maximum energy conservation and lower electric bills
• Much Smoother Rotation
• Less heat transfer
• Fewer vibrations
• 20ft. cord

• 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer

5 models available:
Syncra 2.0 DW Pump: 568gph, 3/4" female inlet, 3/4" female outlet
Syncra 3.0 DW Pump: 714gph, 3/4" female inlet, 3/4" female outlet
Syncra 3.5 DW Pump: 660gph, 1" female inlet, 3/4" female outlet
Syncra 4.0 DW Pump: 952gph, 1" female inlet, 3/4" female outlet
Syncra 5.0 DW Pump: 1321gph, 1" female inlet, 3/4" female outlet








Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Syncra High Flow Pumps
Syncra High Flow pumps are engineered and tested to outperform pumps rated at much higher flow at equal head pressures.

The Syncra HIgh Flow models, with all the great features of the Syncra line, incorporate new leading edge technologies that move them into a class all their own. This exclusive technology, combined with the new electronic engineering of the motor, assures optimized performances while maintaining low power consumption and maximum energy efficiency. The powerful permanent magnet synchronous motors ensure high energy efficiency and reliability for both submersed or external inline applications. SYNCRA HF pumps are engineered for a wide range of applications: gardens, fresh and salt water tanks, water cooling, above ground swimming pools, drainage, fountains and many other uses.
Dimensions: 11.5" X 6.7"

• constructed with standard male threaded inlets and outlets for hook up with fittings for any installation.
• available in three models that will save up to 50% of electrical costs over comparably rated pumps.
• designed for real world applications thus optimizing flow and energy efficiency as head pressure increases.

Features:
• CE, ETL and CETL listed
• Energy efficient motor
• available with 6' bipolar or grounded cord
• 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer
Three models:
Syncra 10 2500gph, 1" inlet, 1" outlet, 4' max head, 7.12psi
Syncra 12 3200gph, 1-1/2" inlet, 1-1/2" outlet, 17.5' max head, 7.40psi
Syncra 16 4200gph 1-1/2" inlet, 1-1/2" outlet, 16.4' max head, 6.68psi





Download Cut Sheet
Choosing A Pump



Pump Comparison Chart

AQUA3 Cage Pumps
AQUA3
is a line of multifunction pumps to power filters, water features, and waterfalls and streams. This new generation of pond pumps is composed of a pump contained within a housing which allows a continuous function with less frequent cleaning.

The pump housing is cylindrical in shape and provides a broad suction surface. Slots about 2mm wide allow the water to pass through all parts of the housing except the base. The heaviest particles of waste are in fact deposited on the bottom rather than drawn into the housing, which would cause rapid clogging of the pump.

All AQUA3 pumps have a telescopic pipe with flow diverter and a “T valve” type for water features and recirculation and for.more precise sharing of the water between the water feature and the filter.

The large base also ensures great pump stability, and keeps the pump upright. The handle allows removal of the pump without having to go into the pond. As with any pump, it is recommended not to remove the pump by pulling the cord.

The unique AQUA3 housing allows for the positioning of a Halley spotlight.

Aqua3 2500 Cage Pump with Fountain
658gph




Easy Line multifunction pumps for water recirculation

Mi Mouse • Micra • Micra Plus • Nova • Idra • Extrema • Suprema





Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Mi Mouse Pumps
Mi Mouse
is a pump with excellent performance. Ideal for use in small spaces thanks to its compact dimensions. A totally submersible pump driven by a permanent magnet induction motor. Mi Mouse has variable adjustment of the water flow rate. The Mi Mouse is equipped with a fixed water outlet pipe 10mm high, with an external diameter of 13mm. Ideal for indoor fountains, aquariums, and tortoise tanks. The pump is fitted with vibration-dampening rubber pads that make it run quiet. Pump Dimensions: 42mm x 58.5mm x 46mm
Outlet: 13mm
Outlet Tube Adapter Size: 3/8"

• 82gph with flow regulator, 1.8' max head, 0.78psi
• 1.8 feet shut off
• 6.2 watts/ 120 volts
• CE & UL listed
• 2 year guarante
• stainless steel shaft
• fully submersible
• flow regulator in all models
• available with 6' bipolar or grounded cord
• optional connector adapts to fit 5mm to 10mm tubing



Spare Parts: Impeller - #90902
Optional hose connector - #90904
Impeller MiMouse - SGR0092
Prechamber - #90900
Suckers (2pcs) - #90903
Kit Adapter (5 pcs) - #90904



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Micra Pumps
Micra Pumps
are completely submersible recirculation pumps driven by a permanent magnet type synchronous motor for every type of aquarium, terrarium, internal or external fountain, landscaping construction, and for any application which requires the recirculation of water. The primary feature of these pumps is that the suction inlet is made from its bottom, which permits optimum operation even with very low water levels. Built in accordance with the most strict international safety standards, the pumps are easy to maintain and have incredible small dimensions for their elevated performance and reliability. The entire line is provided with a variable flow rate regulator as well as adaptors to connect flexible hoses from 13mm to 20mm. The compact dimensions of these pumps, make them ideal for use in small spaces.
Pump Dimensions: 43mm x 57mm x 52mm
Outlet: 13mm
Outlet Tube Adapter Size: 1/2" or 3/8"

• 90gph adjustable flow rate, 1.9' max head, 0.82psi
• 1.9 feet shut off
• 6 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' bipolar or grounded cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #9004
Suction Cup - #90550
Sponge - #90551
Hose connector - #90553
Front panel/volute - #90554
Impeller Micra - 90047/A
Kit suction cups (20 pcs) - 90550
Sponges (10 pcs) - 90551
Flow Taps (5 pcs) - 90552
Small Tube d13 (5 pcs) - 90553
Kit grid (5 pcs) - 90554
Pump Cover (5 pcs) - 90555



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Micra Plus Pumps
Micra Plus Pumps
are completely submersible recirculation pumps driven by a permanent magnet type synchronous motor for every type of aquarium, terrarium, internal or external fountain, landscaping construction, and for any application which requires the recirculation of water. The primary feature of these pumps is that the suction inlet is made from its bottom, which permits optimum operation even with very low water levels. Built in accordance with the most strict international safety standards, the pumps are easy to maintain and have incredible small dimensions for their elevated performance and reliability. The entire line is provided with a variable flow rate regulator as well as adaptors to connect flexible hoses from 13mm to 20mm. The compact dimensions of these pumps, make them ideal for use in small spaces.
Pump Dimensions: 43mm x 57mm x 52mm
Outlet: 13mm
Outlet Tube Adapter Size: 1/2" or 3/8"

• 158gph adjustable flow rate, 2.8' max head, 1.22psi
• 2.8 feet shut off
• 7 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' bipolar or grounded cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #9004
Suction Cup - #90550
Sponge - #90551
Hose connector - #90553
Front panel/volute - #90554
Impeller Micra - 90047/A
Kit suction cups (20 pcs) - 90550
Sponges (10 pcs) - 90551
Flow Taps (5 pcs) - 90552
Small Tube d13 (5 pcs) - 90553
Kit grid (5 pcs) - 90554
Pump Cover (5 pcs) - 90555



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Nova Pumps
Nova Pumps
are completely submersible permanent magnet synchronous motor pumps. The flow regulator on the front section allows you to vary water flow with precision, up to 178gph. Nova can be easily connected to rigid piping with 13mm diameter or, using the adapter included, to flexible hose with 12mm inside diameter. It is also possible to connect the pump to 9mm flexible hose and to 10mm rigid pipe, thanks to an optional adapter. When a wider base is required, Nova's folding suction feet can be used.
Ideal for freshwater, marine, and nano tanks.
.
Pump Dimensions: 72mm x 60mm x 61mm
Outlet: 13mm
Outlet Tube Adapter Size: 1/2"

• 178gph adjustable flow rate
• 4.8 feet shut off
• 9.6 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #90037
Suction Cup - #90550
Sponge - #90551
Hose connector - #90553



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Idra Pumps
Idra Pumps
are fully submersible pumps, driven by a permanent magnet type syncronous motor. To regulate water flow with precision, Idra has a flow regulator fitted into the front section. The pump has a 1/2" threaded outlet coupling.It is also possible to connect flexible hoses with an inside diameter of 20 mm, using the adapter supplied in the standard version. When a platform base is required, the pump's foldable suction cup feet can be used.
Ideal for freshwater, marine, and nano tanks..
Pump Dimensions: 86mm x 83mm x 72mm
Outlet: 1/2" Female thread
Outlet Tube Adapter Size: 3/4" ID

• 90gph adjustable flow rate
• 7' shut off
• 22 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #90724
Suction Cup - #90550
O-Ring - #90653
Hose connector - #90658



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Extrema Pumps
Extrema Pumps
are completely submersible recirculation pumps driven by a permanent magnet type synchronous motor for every type of aquarium, terrarium, internal or external fountain, landscaping construction, and for any application which requires the recirculation of water. The primary feature of these pumps is that the suction inlet is made from its bottom, which permits optimum operation even with very low water levels. Built in accordance with the most strict international safety standards, the pumps are easy to maintain and have incredible small dimensions for their elevated performance and reliability. The entire line is provided with a variable flow rate regulator as well as adaptors to connect flexible hoses from 13mm to 20mm. The compact dimensions of these pumps, make them ideal for use in small spaces.
Pump Dimensions: 108mm x 104mm x 72mm
Outlet: 3/4" Female thread
Outlet Tube Adapter Size: 3/4" ID

• 475gph adjustable flow rate
• 8.2 feet shut off
• 28 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #90762
Suction Cup - #90657
Hose connector - #90572
O-Ring - #90673
Ceramic Shaft - #90125



Download Cut Sheet
Choosing A Pump



Pump Comparison Chart
Suprema Pump
The submersible Suprema Pump was conceived as Extrema's evolution, but with higher performances. Suprema is driven by a permanent magnet type synchronous motor with water-resistant ceramic shaft and bushes. Suprema has a flow regulator fitted on the front section, to vary water flow with precision. The pump has a 3/4" threaded outlet coupling. It is possible to connect flexible hoses with an inside diameter of 3/4" ID, using the adapter included with the pump. When a wide platform base is required, the pump's folding suction feet can be used.
Pump Dimensions: 108mm x 104mm x 72mm
Outlet Tube Adapter Size: 3/4" ID

• 980gph adjustable flow rate
• 8.2 feet shut off
• 50 watts/ 120 volts
• CE & UL listed
• 2 year guarantee
• Stainless steal shaft
• available with 6' cord
• fully submersible
• interchangeable sponge filter
• tubing adapter for rigid or flexible tubing included


Spare Parts
Impeller - #90764
Suction Cup - #90657
Hose connector - #90572
O-Ring - #90673
Ceramic Shaft - 90125





Download Multi Aquarium
Cut Sheet


Download Multi Pond
Cut Sheet


Download Technical Data

Choosing A Pump


Pump Comparison Chart
Multi Quiet Pumps
The Sicce Multi Quiet Pumps are non-neodymium rotor pumps designed for demanding applications. Cooler, quieter, and more efficient than the lower quality products on the market and carefully placed between the Sicce Syncra and our Easy Series of pumps, Sicce Multi Quiet Pumps offer consumers Italian quality at a budget-friendly price. Sicce Multi Quiet Pumps are perfect for hydroponics, aquariums, and pond applications. With 5 models available, there is a pump for every application.

PROS compared to the Syncra line
• More competitively priced
• Lower electrical consumption in some models
• Rotors are less expensive

 
CONS compared to the Syncra line
• Higher decibel rating
• Less efficient, more heat production
• The 800 model works only submersed
• Flow regulation available on only two models (800, 1300)


Features:
• uni-directional volute
• male thread inlet and outlet
• 6ft bipolar for aquariums or indoor hydroponics
• 20ft grounded cords for outdoor use




Download Cut Sheet

Pump Comparison Chart



The EkoPower Pump range has been designed for applications in koi and ornamental ponds where an efficient and powerful pump is needed to keep the water clear and oxygenated while managing organic wastes and debris. This powerful range of pumps has a large surface area for filtration and a high performance pump inside that can also power surface skimmers, external filters and waterfalls. The EkoPower can process solids up to 1/4" without clogging!

Eko Power 10.0 2600gph 95W 12ft
Eko Power 12.0 3000gph 110W 15ft
Eko Power 14.0 3600gph 130W 17ft


Features and Uses:
• Practical and strong case with a high performing Sicce Pumps inside
• Thermal protection system reduces overheating and guarantees perfect functioning 24 hours a day
• Second inlet for additional equipment like surface skimmers
• No pre-filter sponge necessary
• Syncronous motor with optimized energy efficiency
• Threaded female couplings and fittings
• Energy efficient for lower operating costs
• Threaded female couplings and fittings with hose adapters










About Us | SICCE Voyager | SICCE Aquarium | SICCE Pond | Find a Dealer
Become a Dealer | Dealer Log In and Ordering |
SICCE Italy


©2017 SICCE USA All rights reserved